---------------------------
| DO IT YOURSELF INSTALLATION |
  ---------------------------

* INTRODUCTION *
  This section outlines the steps you must follow in order 
  to properly install your new turf.Of course, if you wish 
  to discuss any aspects of the installation process we 
  would be happy to help.  

  Please call us on 
  61-7-3114 8230


* STEP 1 - Preparation *
  1)	Spray any existing grass or weeds using Roundup or 
        a similar chemical being sure to follow the 
	manufacturers recommendations.  Wait 7 to 10 days.
  2)	Remove debris.  Shape ground to desired levels being 
        careful to achieve correct drainage.
  3)	Rotary hoe or cover with organic soil to a depth of 
        50 to 100mm.  If you need soil delivered direct to 
	your home then please call us 07-3114 8230.
  4)	When selecting soil use only a screened product 
        preferably an organic under turf mix. At a depth of 
	100mm you will need 1 cubic metre to cover 10 square 
	metres. If you only want a depth of 50 mm then you 
	will need to order 1 cubic metre of soil for every 
	20 square metres of turf area.
  5)	Spread the soil and smooth by raking
  6)	Prepare a sketch of your site and using a tape 
        measure mark the dimensions of the different areas 
	and note any unusual features.  If you wish you can 
	email or fax your sketch to us and we will calculate 
	the amount of turf you will need.


* STEP 2 - Ordering your turf *
  1)	Order your turf for the day you plan to install it
  2)	Ensure you have the necessary tools to complete your 
        installation.  You will need a cutting spade (or a 
	large knife), a roller, a hose, a wheelbarrow and a 
	rake.
  3)	Obtain a good Turf Starter Fertiliser.  Check the 
        recommended application rate to calculate how much 
	you will need.  Pre plant fertiliser is a must for 
	successful turf establishment.  We can home deliver 
	a professional turf starter (order now).
  4)	If you wish, a sales representative can come to your 
        house and give you a no obligation price to install
	the turf for you.  Please contact us.


* STEP 3 - Installing your new turf *
  1)	Spread fertiliser on soil
  2)	Start at a straight edge such as a path or driveway
  3)	Stagger the joints in each new row like a row of 
        bricks
  4)	Make sure all joints (sides & ends) are butted 
        together tightly without overlapping
  5)	Use a large knife of spade for cutting turf around 
        tress, beds and edging
  6)	Water your turf as you go, starting 15 minutes after 
        you lay the first roll
  7)	After you have installed all of your turf, use your 
        roller to smooth out any footprints etc.  This will 
	also remove any air pockets and ensure the turf makes 
	good contact with the soil.
  8)	Give the whole area a good soaking.  We recommend 
        25mm of water for it's first watering.  To measure 
	simply place a container under the sprinkler until 
	it has 25mm in the bottom


* STEP 4 - Watering shchedule *
  Following the initial soaking you will need to ensure your
  new turf does not dry out on the surface.  You may need 1 
  or 2 light waterings per day for the first few days until 
  the turf starts to put some roots down. Of course, this 
  will depend on what time of the year you are installing 
  your new turf. Be careful not to over water.  After the 
  initial establishment of your new turf (14-21 days) you 
  should follow the maintenance information we have provided.  
  Go to the home page and choose 'Turf Maintenance' on the 
  left hand menu bar where we have outlined what you will 
  need to do to make sure you have the best looking lawn 
  in your street.